User’s Manual of WGSD-1022/WGSD-8000

Use the Add to List button to add the ACL Binding configuration to the ACL Binding Table at the bottom of the screen.

4.7.2 Radius

Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks. RADIUS servers provide

a centralized authentication method for web access (see figure 4-28).

Figure 4-28RADIUS screen

The Page contains the following fields:

•IP Address

•Priority

The Authentication Server IP address.

Displays the server priority. The possible values are 0-65535, where 1 is the highest value. The RADIUS Server priority is used to configure the server query order

•Authentication Port

•Number of Retries

•Timeout for Reply

Identifies the authentication port. The authentication port is used to verify the RADIUS server authentication.

The authenticated port default is 1812

Defines the number of transmitted requests sent to RADIUS server before a failure occurs. The possible field values are 1 - 10.

Three is the default value.

This defines the amount of the time in seconds the device waits for an answer from the RADIUS server before retrying the query, or switching to the next server.

- 76 –