User’s Manual of WGSD-1022/WGSD-8000

Console (config)# snmp-server contact abc_Tecnical_Support

5.20.3 snmp-server location

The snmp-server location global configuration command sets up information on where the device is located. To remove the location string use, the no form of this command.

Syntax

snmp-server location text

no snmp-server location

text — Character string, up to 160 characters, describing the system location.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Do not include spaces in the text string.

Example

The following example sets the device location as "New_York".

Console (config)# snmp-server location New_York

5.20.4 snmp-server enable traps

The snmp-server enable traps global configuration command enables the switch to send SNMP traps. To disable SNMP traps

use the no form of the command.

Syntax

snmp-server enable traps

no snmp-server enable traps

Default Configuration

Enabled

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

- 290 –