User’s Manual of WGSD-1022/WGSD-8000

Figure 4-38Bandwidth screen

Queue shaping can be based per queue and/or per interface. Shaping is determined by the lower specified value. The queue shaping type is selected in the Bandwidth screen, include interface, port, LAG, Rate Limit, Ingress Rate Limit Status, Rate Limit….

The page contains the following fields:

•Interface

•Ingress Rate Limit Status

•Rate Limit

(62-1000000 Kbps)

•Egress Shaping Rate on Selected Port

•Committed Information Rate (CIR)

Indicates the interface for which the queue shaping information is displayed. The possible field values are:

•Port, indicates the port for which the bandwidth settings are displayed.

•LAG, indicates the LAG for which the bandwidth settings are displayed.

which indicates if rate limiting is defined on the interface

Defines the amount of bandwidth assigned to the interface.

The possible field values are 62-1000000Kbps.

Indicates if rate limiting is enabled on the interface.

Defines CIR as the queue shaping type.

The possible field value is 64 - 1,000,000 Kbps.

- 93 –