User’s Manual of
Default Configuration
By default, all ports are enabled for
Command Modes
Interface Configuration (Ethernet,
User Guidelines
There are no user guidelines for this command.
Example
The following example disables
Console (config)# interface ethernet e5
Console
The
Syntax
no
cost — The port path cost (Range: 1 - 200,000,000 )
Default Configuration
The default costs are as follows:
Port Channel — 20,000
1000 mbps (giga) — 20,000
100 mbps — 200,000
10 mbps — 2,000,000
Command Modes
Interface Configuration (Ethernet,
User Guidelines
The method used (long or short) is set by using the
Example
The following example configures the
- 299 –