User’s Manual of WGSD-1022/WGSD-8000

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the spanning-tree protocol to RSTP.

Console(config)# spanning-tree mode rstp

5.21.3 spanning-tree forward-time

The spanning-treeforward-timeglobal configuration command configures the spanning-tree bridge forward time, which is the amount of time a port remains in the listening and learning states before entering the forwarding state.

To reset the default forward time, use the no form of this command.

Syntax

spanning-tree forward-time seconds

no spanning-tree forward-time

ƒseconds — Time in seconds .(Range: 4 - 30)

Default Configuration

The default forwarding-time for IEEE Spanning-tree Protocol (STP) is 15 seconds.

Command Modes

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures spanning-tree bridge forward time to 25 seconds.

Console(config)# spanning-tree forward-time 25

5.21.4 spanning-tree hello-time

The spanning-treehello-timeglobal configuration command configures the spanning-tree bridge hello time, which is how often the switch broadcasts hello messages to other switches.To reset the default hello time, use the no form of this command.

- 296 –