User’s Manual of WGSD-1022/WGSD-8000
Queue 5—6/36
Queue 6—6/36
Queue 7—6/36
Queue 8—6/36
Console (config-if)# wrr-queue bandwidth 6 6 6 6 6 6 6 6
5.17.5 priority-queue out num-of-queuesThe priority-queue out num-of-queuesglobal configuration command enables the egress queues to be expedite queues. Use the no form of this command to return to the default values.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
number-of-queues— Assign the number of queues to be expedite queues. The expedite queues would be the queues with higher indexes. The range is 1 – 8.
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
When configuring the priority-queue out num-of-queuescommand, the weighted round robin (WRR) weight ratios are affected because there are fewer queues participating in WRR.
Example
The following example sets queue 7, 8 to be an EF queue.
Console (config)# priority-queue out num-of-queues 2
5.17.6 show qos interfaceThe show qos interface user EXEC command displays interface QoS data.
Syntax
show qos interface [ethernet interface-numbervlan vlan-id port-channel number] [buffers queuing policers shapers]
ethernet interface-number— Ethernet port number.
- 260 –
