Powerware 9330 operation manual 164201300 REV. G

8.If permanently mounting the system, proceed to step 15; otherwise, proceed to step 9.

9.Secure the new Battery cabinet in position by lowering the leveling feet, until cabinet is not resting on the casters and the cabinet is level.

10.Secure the front of Battery cabinets by sliding the angle grounding/mounting bracket, from installation kit, behind the base of the Battery cabinets with the bottom angle facing outward (see Figures 2---5 or 2---7). Use hardware provided in the kit to secure the bracket.

11.Remove the top side panel mounting screw (tie/grounding bracket location in Figures 2---5 or 2---7) from both the Battery cabinets.

12.Secure the back of Battery cabinets with the tie/grounding bracket. Secure the bracket with the side panel mounting screws.

13.Install side panel removed from the previously installed Battery cabinet to the right side of the new Battery cabinet. Secure with screws removed from Battery cabinet.

14.When all wiring is complete, proceed to Chapter 3 and connect battery strings in accordance with instructions contained in paragraph 3.4.2.

15.Using retained hardware, reinstall shipping brackets previously removed to front and rear of new Battery cabinet with the angle facing outward.(see Figures 2---6 or 2---8).

16.Secure the front of Battery cabinets with the long flat grounding/mounting bracket from the installation kit (see Figures 2---6 or 2---8). Use hardware provided in the kit to secure the bracket.

17.Remove the top side panel mounting screw (tie/grounding bracket location in Figures 2---6 or 2---8) from both the Battery cabinets.

18.Secure the back of Battery cabinets with the tie/grounding bracket. Secure the bracket with the side panel mounting screws.

19.Install side panel removed from the previously installed Battery cabinet to the right side of the new Battery cabinet. Secure with screws removed from Battery cabinet.

20.Secure cabinets to floor with contractor supplied hardware.

21.When all wiring is complete, proceed to Chapter 3 and connect battery strings in accordance with instructions contained in paragraph 3.4.2.

22.Repeat steps 1 through 21 to join additional Battery cabinets.

Powerware 9330 (10 kVA--40 kVA) Installation and Operation	2--19
164201300 REV. G 061502