
Operational Controls
and Features
7.1General
The UPS system should function automatically and require very little attention during normal operation. The controls and indicators identified in this section are used during startup, to monitor normal operation and during abnormal events.
Figure 7---1 identifies and shows the location of the controls and indicators on the Powerware 9330 (10 kVA---20 kVA) UPS and Figure 7---2 identifies and shows the location of the controls and indicators on the Powerware 9330 (25 kVA---40 kVA)
UPS. The descriptions provide a brief overview of the UPS controls, and standard and optional features.
NOTE: Read the Operation section of this manual and have thorough knowledge of UPS operation before attempting to operate any of the UPS controls or optional components.
7.2UPS Operational Controls
The UPS has many standard features that provide
7.2.1Control Panel
The Control Panel on the front of the UPS contains an LCD screen to display the current status of the UPS system. You can view a statistical history and log of system events and display a
Powerware 9330 (10 | |
164201300 REV. G 061502 |
|