7.5Safety Considerations

The UPS enclosure is designed for industrial or computer room applications, and contain safety shields. However, the system is sophisticated and should be handled with appropriate care, following these guidelines:

·Keep surroundings clean and free from excess moisture.

·Do not operate the system close to gas or electric heat sources.

·The system is not intended for outdoor use.

·The system operating environment should be maintained within the parameters stated in this manual.

·Keep the system doors closed to ensure proper cooling airflow and to protect personnel from dangerous voltages inside the unit.

·The system contains its own power source. Lethal voltages are present even when the system is disconnected from utility power.

WARNING:

Only AUTHORIZED SERVICE PERSONNEL should perform service or maintenance on the UPS.

If service or routine maintenance is required:

·Ensure all power is disconnected before performing installation or service.

·Ensure the area around the UPS is clean and uncluttered.

·Battery cabinet maintenance or battery replacement should be performed only by authorized service personnel.

·Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the equipment.

·Always conform to the more detailed safety precautions described in “Important Safety Instructions” section of Chapter 14.

7--8

Powerware 9330 (10 kVA--40 kVA) Installation and Operation

 

164201300 REV. G 061502

Page 96
Image 96
Powerware 9330 operation manual Safety Considerations