Sharp AR-M257 STAPLE CARTRIDGE REPLACEMENT

STAPLE CARTRIDGE REPLACEMENT

(when the finisher (AR-FN5A) is installed)

When the message "ADD STAPLES." appears, replace the staple cartridge as follows:

1 Open the stapler cover.

5 Remove the tape from the cartridge.

2 Grasp the green portion of the staple box and remove the staple box from the stapler.

6 Insert the staple box into the stapler unit until it clicks into place.

	3 Remove the staple cartridge from	7 Close the stapler cover.
	3 Remove the staple cartridge from	5
	inside the staple box.	5

4 Insert the new staple cartridge into the box until it clicks into place.

Insert the new cartridge by aligning the arrows on the cartridge with those on the box.

Check that the cartridge has locked into place by pulling it slightly.