CONVENIENT COPY FUNCTIONS

1 Place the original(s). (p.22, p.23)

2 Touch the [OUTPUT] key.

2-SIDED COPY

OUTPUT

3 Touch the [STAPLE SORT] key.

 

 

 

 

 

 

 

 

 

When the [STAPLE

 

OUTPUT

 

 

 

 

 

 

 

 

TOP TRAY

 

SORT] key is selected,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SORT

 

 

 

 

 

 

 

the offset tray is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

automatically selected as

 

STAPLE

 

 

 

 

 

 

 

SORT

 

 

 

 

 

 

 

the output tray. The top

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tray and center tray

 

 

 

OFFSET

 

 

 

GROUP

 

 

 

 

 

 

 

 

TRAY

 

 

 

cannot be used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Touch the [OK] key.

OK

CENTER TRAY

OFFSET

5 Select the number of copies and other copy settings, and then press the [START] key ().

6 [When using the RSPF:]

Copying will start after all originals have been scanned.

[When using the document glass:]

Replace the original with the next original and press the [START] key ( ). Repeat this step until all originals have been scanned, and then touch the [READ-END] key.

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

If the memory becomes full while scanning the originals, "MEMORY IS FULL. PRESS [START] TO BEGIN COPYING OR [CA] TO CANCEL." will appear. To copy only the originals that have been scanned, press the [START] key ( ). To cancel the job, press the [CLEAR ALL] key ( ).

The number of originals that can be scanned Note into memory can be increased by increasing

the memory allocation in the key operator programs, or by installing more memory. (See the "Key operator’s guide".)

38