TROUBLESHOOTING AND MAINTENANCE
MISFEED IN THE UPPER EXIT AREA(when a job separator tray kit or finisher
(when a job separator tray kit or finisher (AR-FN5A) is installed)
If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area.
1 Open the upper right side cover.
3 Close the upper right side cover.
Make sure that the misfeed message is cleared.
2 Gently pull the misfed paper out.
Be careful not to tear the misfed paper during removal.
MISFEED IN AN OUTPUT TRAY(when a finisherA MISFEED HAS OCCURRED.
INFORMATION
1 Grasp the handle of the stapler compiler cover and pull to open the cover.
2 Remove any misfed paper from the transport area.
72