HOW TO USE THE NETWORK SCANNER FUNCTION

SELECTING THE RESOLUTION

The resolution for scanning an original can be selected. Load the original in scanner mode and then follow the steps below. The factory default setting for the resolution is "300 dpi".

Change the resolution

1 Touch the [RESOLUTION] key.

QUALITY

300dpi

RESOLUTION

TIFF-G4

FILE FORMAT

AUTO 8½X11

ORIGINAL

2 Touch the desired resolution key.

200dpi

300dpi

600dpi

Touch the resolution key that is most suitable for the original.

The selected key will be highlighted.

3 Touch the [OK] key.

OK

200dpi

You will return to the initial screen.

300dpi

600dpi

• The resolution is initially set to 300 dpi (factory default setting). A resolution of 200 dpi or 300 dpi produces

Note sufficiently clear image data for normal text originals. (200 dpi is equivalent to the "Fine" character mode used for facsimiles).

The 600 dpi setting should only be used in cases where high-clarity image reproduction is required, such as a photograph or an illustration. Note that a high resolution setting will result in a larger file size, and transmission may not be successful if there is insufficient disk capacity in the server to which the image is sent (or if the administrator of the server has restricted the file size). If transmission is not successful, you can try such measures as reducing the number of scanned pages in the file or reducing the scan size setting for the original ("MANUALLY SETTING THE SCANNING SIZE" (p.26)).

•The default resolution setting can be changed in the key operator programs. (See "INITIAL RESOLUTION SETTING" in the key operator's guide.)

•The resolution setting cannot be changed once scanning has begun.

28