Sharp AR-M257 MARGIN SHIFT COPY

CONVENIENT COPY FUNCTIONS

MARGIN SHIFT COPY

The margin shift function is used to automatically shift the text or image on the copy paper approximately 1/2" in its initial setting.

One-sided copying	Image shifted	Image shifted	Image shifted
			down
	to the right	to the left

Margin

MarginMargin

Two-sided copying

Image shifted	Image shifted	Image shifted
to the right	to the left	down
		Margin

Or

•Right, left or down can be selected for the shift direction as shown in the illustration.

•The shift width (margin) can be set from 0" to 1" in increments of 1/8".

•If [DOWN] key is selected, set the original(s) so that the margin to be increased is set to the rear side of the RSPF or the document glass.

3

MarginMargin

1 Touch the [MARGIN SHIFT] key in the special modes screen.

	The margin shift setting
	screen will appear.
MARGIN SHIFT	The margin shift icon
	( , etc.) will also
	appear in the screen to
PAMPHLET COPY
	indicate that the function
	is turned on.

3 Adjust the shift width as needed and touch the [OK] key.

								Use the	and	keys
							OK
								to set the shift width. The
			CANCEL				OK	shift amount can be set
								from 0" to 1" in
SIDE 1				SIDE 2
		inch(0 1)				inch(0 1)		increments of 1/8".
	1/2				1/2

2 Select the shift direction.

Touch the [RIGHT],

[LEFT], or [DOWN] key.

RIGHT LEFT DOWN The selected key will be highlighted.

4 Touch the [OK] key in the special modes screen.

You will return to the main screen of copy mode.

About the steps that follow

If you are using the document glass, see page 22. If you are using the RSPF, see page 23.

•	When margin shift is selected, rotation
Note	copying will not function.

•This feature cannot be used with paper that is not a standard size.

•To cancel the margin shift function, touch the [CANCEL] key in the margin shift setting screen. (See the screen of step 3.)

41