4

PRINTING FROM MACINTOSH

 

Basic printing

(part 4)

5

Configure print settings.

 

Click

next to "Copies &

Pages" ("General" in Mac OS 9.0 to 9.2.2) and select the settings that you wish to configure from the pull-down menu. The corresponding setting screen will appear.

☞Two-sided printing,Printing multiple pages on one page,

Fitting the printed image to the paper, Rotating the print image 180 degrees, Printing a watermark, Stapling printed pages (when a finisher is installed), Job control function (Mac OS 9.0 to 9.2.2 and Mac OS X v10.2 to 10.4)

Printing begins. The print job is delivered to one of the following trays (depending on which output devices are installed):

●Job separator tray kit is installed: Upper tray

●Finisher is installed: Center tray

● The output tray can be selected in the key operator

Note

programs (see "OUTPUT TRAYS" in the key operator's guide).

● The output tray can be selected when selecting print

settings at the time of printing. Select the output tray in

"Output" in the "Advanced" menu of the Print window.

● If you are using Mac OS 9.0 to 9.2.2, select the

output tray in "Output" in the "Output/Document

Style" menu of the Print window.

● If you are using Mac OS X v10.1.5, select the output

Note

The settings vary depending on the operating system

version, the printer driver version, and the application.

tray in the "Output" tab in the "Printer Features" menu

of the Print Window.

● If the paper type setting in the printer driver is different

from the bypass tray's paper type setting in the

6 Click the "Print" button .

machine, printing may stop. To resume printing, press

the [PRINT] key on the operation panel, touch the

[BYPASS TRAY] key in the touch panel, and specify

the same paper type as in the printer driver.

CONTENTS

35