Sharp AR-M257 EXECUTING A JOB PROGRAM, DELETING A STORED JOB PROGRAM

USER SETTINGS

EXECUTING A JOB PROGRAM

1 Press the [ ] key.

ACC.#-C

3 Place the original, check the original size, and then set the number of copies and any other desired copy settings not stored in the program. When finished, press the [START] key ().

2 Touch the program number key of the desired program.

ACC.#-C

JOB PROGRAMS

PRESS PROGRAM NUMBER.

The job program will be executed. A number for which no job program has been stored cannot be selected.

RECALL

DELETING A STORED JOB PROGRAM

1 Press the [ ] key.	3 Select the program number of the
	program to be deleted.

ACC.#-C

		If a number key for which
	EXIT	If a number key for which
		no job program has been
		stored is selected, the
		proceed to step 4 on the
		previous page (for
		storing a job program).
STORE/DELETE		storing a job program).

2 Touch the [STORE/DELETE] key.

4 Touch the [DELETE] key.

NUMBER.

ECALLSTORE/DELETE

A JOB PROGRAM HAS BEEN ALREADY STORED. STORE ANOTHER PROGRAM?

CANCEL DELETE STORE

RECALLSTORE/DELET

The selected program will be deleted and you will return to the screen of step

3.If the [CANCEL] key is touched, you will return to the screen of step 3 without deleting the program.

If you are finished deleting programs, touch the [EXIT] key in the screen of step 3 to exit.