Sharp AR-M257 manual 7

KEY OPERATOR PROGRAM LIST

PROGRAMS FOR PRINT MODE

Program name	Factory default	Page
	settings
PRINT SETTINGS
DEFAULT SETTINGS
PROHIBIT NOTICE PAGE	Disabled	16
PRINTING
PRINT DENSITY LEVEL	3	16
PROHIBIT TEST PAGE	Disabled	16
PRINTING *4
ROTATED PRINT	Enabled	16
FORCED OUTPUT OF	Disabled	16
PRINT
EXCLUDE BYPASS-TRAY	Enabled	16
FROM ATS
DISABLE DEFAULT	Disabled	16
SETTING CHANGES *4
INTERFACE SETTINGS
HEXADECIMAL DUMP	Disabled	17
MODE *4
I/O TIMEOUT	180 (sec)	17
	60 (sec) *4
PARALLEL PORT	AUTO	17
EMULATION SWITCHING *4
USB PORT EMULATION	PCL	17
SWITCHING *4
NETWORK PORT	AUTO	17
EMULATION SWITCHING *4
PORT SWITCHING	SWITCH AT	18
METHOD *4	END OF JOB
ENABLE PARALLEL	Enabled	18
PORT *4
ENABLE USB PORT *4	Enabled	18
ENABLE NETWORK	Enabled	18
PORT *4
ENABLE ECP *4	Disabled	18
NETWORK SETTINGS *4
IP ADDRESS SETTING	DHCP: Enabled	18
ENABLE TCP/IP	Enabled	18
ENABLE NetWare	Enabled	18
ENABLE EtherTalk	Enabled	19
ENABLE NetBEUI	Enabled	19
RESET THE NIC	—	19
INITIALIZE AND/OR STORE SETTINGS *4
RESTORE FACTORY	—	19
DEFAULTS
STORE CURRENT	—	19
CONFIGURATION
RESTORE	—	19
CONFIGURATION

PROGRAMS FOR NETWORK SCANNER MODE

Program name	Factory default	Page
	settings
SCANNER SETTINGS *1
INITIAL FILE FORMAT	• File type: TIFF	20
SETTING	• Compression
	mode: G4
	• Number of pages
	per file: All
INITIAL QUALITY	• Original image	20
SETTING	type: Text/Photo
	• Exposure: Auto
INITIAL RESOLUTION	300 dpi	20
SETTING
DEFAULT DISPLAY	CONDITION	20
SETTINGS	SETTINGS
THE NUMBER OF DIRECT	8 (keys)	20
ADDRESS / SENDER KEYS
DISPLAYED SETTING

*1 Appears when the scanner function is enabled.

*2 Appears when a FINISHER is installed.

*3 Can be enabled when the printer or fax function is enabled and a JOB SEPARATOR TRAY KIT or FINISHER is installed.

*4 Appears when the PRINTER EXPANSION KIT is installed.

*5 Appears when the PRINTER EXPANSION KIT and EXPANSION MEMORY are installed.

5