This chapter explains key operator programs that are used for the network scanner function. These programs can only be configured on models that have the network scanner function.
KEY OPERATOR PROGRAMS |
|
SCANNER SETTINGS | OK |
THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING
This program is used to select the number of
INITIAL FILE FORMAT SETTING
INITIAL QUALITY SETTING
INITIAL RESOLUTION SETTING
1/2
screen and sender selection screen. Selections are [6], [8], and [12].
The factory default setting is "8" (keys).
The "SCANNER SETTINGS" consist of the following programs:
●THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING
Each displayed
of displayed
INITIAL FILE FORMAT SETTING
Use this program to change the default file format (file type, compression mode, and number of pages per file) that is used when sending an image by Scan to
The factory default settings are as follows:
•File type: TIFF
•Compression mode: G4
•Number of pages per file: All
INITIAL QUALITY SETTING
This program is used to set the default original type and exposure level for network scanner mode.
For informatin on these settings, see the operation manual for network scanner.
The factory default settings are as follows:
•Original image type: Text/Photo
•Exposure: Auto
INITIAL RESOLUTION SETTING
This program is used to set the default resolution for network scanner mode.
The factory default setting is "300" (dpi).
DEFAULT DISPLAY SETTINGS
Use this program to select the initial screen that appears when the [SCAN] key is pressed to switch to network scanner mode, or when the [CLEAR ALL] key ( 
) is pressed in scanner mode.
Three selections are available for the initial screen:
•CONDITION SETTINGS
•ADDRESS BOOK (ABC)
•ADDRESS BOOK (GROUP)
The factory default setting is "CONDITION SETTINGS".
20