Sharp AR-M257 SCANNING AND TRANSMITTING A TWO-SIDEDORIGINAL (when an RSPF is installed)

HOW TO USE THE NETWORK SCANNER FUNCTION

SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL (when an RSPF is installed)

Follow these steps to automatically scan a two-sided original.

1 Make sure the machine is in scanner mode and then load the document in the RSPF. (p.20)

2 Touch the [ORIGINAL] key.

RESOLUTION

TIFF-G4

FILE FORMAT

AUTO 8½X11

ORIGINAL

3 Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriate for the original you loaded.

4 Touch the [OK] key.

You will return to the

INAL SIZE	OK	initial screen.
MANUAL
2-SIDED	JOB
TABLET	BUILD

ROTATE THE IMAGE 90 DEGREES

A two-sided original icon appears next to the [ORIGINAL] key.

(Example: The icon that appears when the [2-SIDED BOOKLET] key is touched.)

QUALITY

300dpi

RESOLUTION

TIFF-G4

FILE FORMAT

AUTO 8½X11

	ORIGINAL SIZE
AUTO	MANUAL
2-SIDED	2-SIDED
BOOKLET	TABLET
	ROTATE THE

If you wish to rotate the original 90° when creating an image file, touch the [ROTATE THE IMAGE 90 DEGREES] checkbox (a checkmark should appear in the box).

ORIGINAL

5 Continue from step 4 of "BASIC TRANSMISSION METHOD" (p.20 to 21).

Note

Note

If the correct original size does not appear in the screen of step 2, touch the [MANUAL] key and specify the correct original size (p.26).

•	Booklets and tablets	Booklet	Tablet
	Two-sided originals that are bound at the side are booklets, and two-sided
	originals that are bound at the top are tablets.
•	Two-sided scanning mode turns off after transmission is finished. Two-sided
	scanning mode can also be canceled by pressing the [CLEAR ALL] key
	( ).

24