TROUBLESHOOTING AND MAINTENANCE

 

 

Message

Cause and solution

Page

SELECTED PAPER TRAY IS OUT

Contact your SHARP service center.

-

OF SERVICE.

 

 

 

 

 

 

 

 

CHECK STAPLER POSITION OR

Staples are jammed in the finisher or the staple case is not

 

STAPLE JAM.

attached correctly. Check the staple case. If the message still

 

 

 

 

appears after removing the jammed staples, disable the stapler

76

 

 

 

using "DISABLING OF STAPLER" in the key operator programs

 

 

 

 

 

 

 

(See the "Key operator’s guide.), and contact your SHARP service

 

 

 

 

center.

 

 

 

 

 

 

(CALL FOR SERVICE SOON.)

It will soon be time for regular maintenance. Contact your SHARP

-

 

 

 

service center.

 

 

 

 

 

 

 

 

 

(MAINTENANCE REQUIRED.)

It is time for regular maintenance. Contact your SHARP service

-

 

 

 

center.

 

 

 

 

 

 

 

 

 

CALL FOR SERVICE.

Turn off the power and then turn it back on. If this does not clear

 

CODE:

 

 

the message, write down the 2-digit main code and 2-digit

-

 

 

 

 

sub-code and promptly contact your SHARP service center.

 

 

 

 

 

 

PLEASE CHECK THE ORIGINAL

The original in the RSPF is longer than the size that was detected.

 

SIZE. JOB IS CANCELED.

Reinsert the original, make sure that the size indicated in the

 

 

 

 

touch panel is the same as the actual size, and begin copying. You

-

 

 

 

can also select mixed feeding to copy onto paper that matches

 

 

 

 

each original size after all originals have been scanned.

 

 

 

 

 

 

5

61