TROUBLESHOOTING AND MAINTENANCE

MISFEED IN THE BYPASS TRAY

1 Carefully pull the misfed paper out.

2 Open and close the side cover.

Make sure that the misfeed message is cleared.

The message can also be cleared by opening and closing the front cover.

If the message is not cleared, see "A. Misfeed in the paper feed area".

MISFEED IN THE MACHINE

Determine the location of the misfeed and remove it appropriately as indicated below.

If paper is misfed, go to "B. Misfeed in the fusing area" (p.67).

If paper is misfed here, go to "A. Misfeed in the paper feed area" (below).

A. Misfeed in the paper feed area

1 Open the bypass tray and the side cover.

3 Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the arrow to assist in removing it.

Be careful not to tear the

Roller rotating knobmisfed paper during removal.

2 Press gently on both sides of the front cover and pull it open.

Warning

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.

Do not touch the photoconductive drum Caution (green portion) when removing the misfed

paper. Doing so may damage the drum and cause smudges on copies.

68