Two Port 10/100 Managed Ethernet Switch with
Datasheet
14.2.2.2Transmit Configuration Register (TX_CFG)Offset: | 070h | Size: | 32 bits |
This register controls the Host MAC transmit functions.
BITS | DESCRIPTION | TYPE | DEFAULT |
|
|
|
|
31:16 | RESERVED | RO | - |
|
|
|
|
15 | Force TX Status Discard (TXS_DUMP) | WO | 0b |
| When a 1 is written to this bit, the TX Status FIFO is cleared of all pending | SC |
|
| status DWORD’s and the TX status pointers are cleared to zero. |
|
|
|
|
|
|
14 | Force TX Data Discard (TXD_DUMP) | WO | 0b |
| When a 1 is written to this bit, the TX Data FIFO is cleared of all pending | SC |
|
| data and the TX data pointers are cleared to zero. |
|
|
|
|
|
|
13:3 | RESERVED | RO | - |
|
|
|
|
2 | TX Status Allow Overrun (TXSAO) | R/W | 0b |
| When this bit is cleared, Host MAC data transmission is suspended if the |
|
|
| TX Status FIFO becomes full. Setting this bit high allows the transmitter to |
|
|
| continue operation with a full TX Status FIFO. |
|
|
| Note: This bit does not affect the operation of the TX Status FIFO Full |
|
|
|
|
| |
|
|
|
|
1 | Transmitter Enable (TX_ON) | R/W | 0b |
| When this bit is set, the Host MAC transmitter is enabled. Any data in the |
|
|
| TX Data FIFO will be sent. This bit is cleared automatically when the |
|
|
| STOP_TX bit is set and the transmitter is halted. |
|
|
|
|
|
|
0 | Stop Transmitter (STOP_TX) | R/W | 0b |
| When this bit is set, the Host MAC transmitter will finish the current frame, | SC |
|
| and will then stop transmitting. When the transmitter has stopped this bit will |
|
|
| clear. All writes to this bit are ignored while this bit is high. |
|
|
|
|
|
|
SMSC LAN9311/LAN9311i | 183 | Revision 1.4 |
| DATASHEET |
|