Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Datasheet

BITS

DESCRIPTION

TYPE

DEFAULT

 

 

 

 

7

Collision Test (VPHY_COL_TEST)

R/W

0b

 

This bit enables/disables the collision test mode. When set, the collision

 

 

 

signal to the Host MAC is active during transmission from the Host MAC.

 

 

 

Note: It is recommended that this bit be used only when in loopback

 

 

 

mode.

 

 

 

0: Collision test mode disabled

 

 

 

1: Collision test mode enabled

 

 

 

 

 

 

6

Speed Select MSB (VPHY_SPEED_SEL_MSB)

RO

0b

 

This bit is not used by the Virtual PHY and has no effect. The value returned

 

 

 

is always 0.

 

 

 

 

 

 

5:0

RESERVED

RO

-

 

 

 

 

Note 14.16 The reserved bits 31-16 are used to pad the register to 32-bits so that each register is on a DWORD boundary. When accessed serially (through the MII management protocol), the register is 16-bits wide.

Revision 1.4 (08-19-08)

248

SMSC LAN9311/LAN9311i

 

DATASHEET