Two Port 10/100 Managed Ethernet Switch with
Datasheet
|
| Table 16.2 LAN9311/LAN9311i | ||
|
|
|
|
|
| MIN | NOMINAL | MAX | REMARKS |
|
|
|
|
|
A | - | - | 1.20 | Overall Package Height |
|
|
|
|
|
A1 | 0.05 | - | 0.15 | Standoff |
|
|
|
|
|
A2 | 0.95 | 1.00 | 1.05 | Body Thickness |
|
|
|
|
|
D/E | 15.80 | 16.00 | 16.20 | X/Y Span |
|
|
|
|
|
D1/E1 | 13.80 | 14.00 | 14.20 | X/Y Plastic Body Size |
|
|
|
|
|
D2/E2 | 6.35 | 6.50 | 6.65 | X/Y Exposed Pad Size |
|
|
|
|
|
L | 0.45 | 0.60 | 0.75 | Lead Foot Length |
|
|
|
|
|
b | 0.13 | 0.18 | 0.23 | Lead Width |
|
|
|
|
|
c | 0.09 | - | 0.20 | Lead Foot Thickness |
|
|
|
|
|
e |
| 0.40 BSC |
| Lead Pitch |
|
|
|
|
|
ddd | 0.00 | - | 0.07 | True Position Spread |
|
|
|
|
|
ccc | - | - | 0.08 | Coplanarity |
|
|
|
|
|
Notes:
1.All dimensions are in millimeters unless otherwise noted.
2.Dimensions b & c apply to the flat section of the lead foot between 0.10 and 0.25mm from the lead tip. The base metal is exposed at the lead tip.
3.Dimensions D1 and E1 do not include mold protrusions. Maximum allowed protrusion is 0.25mm per side. D1 and E1 are maximum plastic body size dimensions including mold mismatch.
4.Dimensions D2 and E2 represent the size of the exposed pad. The exposed pad shall be coplanar with the bottom of the package within 0.05mm.
5.The pin 1 identifier may vary, but is always located within the zone indicated
.
Figure 16.4 LAN9311/LAN9311i
SMSC LAN9311/LAN9311i | 459 | Revision 1.4 |
| DATASHEET |
|