Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Datasheet

14.2.2.7Host MAC CSR Interface Command Register (MAC_CSR_CMD)

Offset:

0A4h

Size:

32 bits

This read-write register is used to control the read and write operations to/from the Host MAC. This register in used in conjunction with the Host MAC CSR Interface Data Register (MAC_CSR_DATA) to indirectly access the Host MAC CSR’s.

Note: The full list of Host MAC CSR’s are described in Section 14.3, "Host MAC Control and Status Registers," on page 271. For more information on the Host MAC, refer to Chapter 9, "Host MAC," on page 113.

BITS

DESCRIPTION

TYPE

DEFAULT

 

 

 

 

31

CSR Busy

R/W

0b

 

When a 1 is written into this bit, the read or write operation is performed to

SC

 

 

the specified Host MAC CSR. This bit will remain set until the operation is

 

 

 

complete. In the case of a read, this indicates that the host can read valid

 

 

 

data from the Host MAC CSR Interface Data Register (MAC_CSR_DATA).

 

 

 

Note: The MAC_CSR_CMD and MAC_CSR_DATA registers must not be

 

 

 

modified until this bit is cleared.

 

 

 

 

 

 

30

R/nW

R/W

0b

 

When set, this bit indicates that the host is requesting a read operation.

 

 

 

When clear, the host is performing a write.

 

 

 

0: Host MAC CSR Write Operation

 

 

 

1: Host MAC CSR Read Operation

 

 

 

 

 

 

29:8

RESERVED

RO

-

 

 

 

 

7:0

CSR Address

R/W

00h

 

The 8-bit value in this field selects which Host MAC CSR will be accessed

 

 

 

by the read or write operation. The index of each Host MAC CSR is defined

 

 

 

in Section 14.3, "Host MAC Control and Status Registers," on page 271.

 

 

 

 

 

 

Revision 1.4 (08-19-08)

188

SMSC LAN9311/LAN9311i

 

DATASHEET