Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Datasheet

14.2.3.2General Purpose I/O Data & Direction Register (GPIO_DATA_DIR)

Offset:

1E4h

Size:

32 bits

This read/write register configures the direction of the 12 GPIO pins and contains the GPIO input and output data bits.

BITS

DESCRIPTION

TYPE

DEFAULT

 

 

 

 

31:28

RESERVED

RO

-

 

 

 

 

27:16

GPIO Direction 11-0 (GPIODIR[11:0])

R/W

0h

 

These bits set the input/output direction of the 12 GPIO pins.

 

 

 

0: GPIO pin is configured as an input

 

 

 

1: GPIO pin is configured as an output

 

 

 

 

 

 

15:12

RESERVED

RO

-

 

 

 

 

11:0

GPIO Data 11-0 (GPIOD[11:0])

R/W

0h

 

When a GPIO pin is enabled as an output, the value written to this field is

 

 

 

output on the corresponding GPIO pin. Upon a read, the value returned

 

 

 

depends on the current direction of the pin. If the pin is an input, the data

 

 

 

reflects the current state of the corresponding GPIO pin. If the pin is an

 

 

 

output, the data is the value that was last written into this register. For

 

 

 

GPIOs 11-10 and 7-0, the pin direction is determined by the GPDIR bits of

 

 

 

this register. For GPIOs 9 and 8, the pin direction is determined by the

 

 

 

GPDIR bits and the 1588_GPIO_OE bits in the General Purpose I/O

 

 

 

Configuration Register (GPIO_CFG).

 

 

 

 

 

 

SMSC LAN9311/LAN9311i

195

Revision 1.4 (08-19-08)

 

DATASHEET