Two Port 10/100 Managed Ethernet Switch with
Datasheet
14.5.3.25Switch Engine Ingress Rate Configuration Register (SWE_INGRSS_RATE_CFG)
Register #: | 184Ah | Size: | 32 bits |
This register, along with the settings accessible via the Switch Engine Ingress Rate Command Register (SWE_INGRSS_RATE_CMD), is used to configure the ingress rate metering/coloring.
BITS |
| DESCRIPTION | TYPE | DEFAULT |
|
|
|
| |
31:3 | RESERVED | RO | - | |
|
|
|
| |
2:1 | Rate Mode | R/W | 00b | |
| These bits configure the rate metering/coloring mode. |
|
| |
| 00 | = Source Port & Priority |
|
|
| 01 | = Source Port Only |
|
|
| 10 | = Priority Only |
|
|
| 11 = RESERVED |
|
| |
|
|
|
| |
0 | Ingress Rate Enable | R/W | 0b | |
| When set, ingress rates are metered and packets are colored and dropped |
|
| |
| if necessary. |
|
| |
|
|
|
|
|
SMSC LAN9311/LAN9311i | 395 | Revision 1.4 |
| DATASHEET |
|