Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Datasheet

14.2.5.3Port x 1588 Sequence ID, Source UUID High-WORD Receive Capture Register (1588_SEQ_ID_SRC_UUID_HI_RX_CAPTURE_x)

 

Offset:

Port 1: 108h

Size:

32 bits

 

 

 

Port 2: 128h

 

 

 

 

 

 

Port 0: 148h

 

 

 

 

 

 

 

 

 

 

 

BITS

 

DESCRIPTION

 

 

TYPE

DEFAULT

 

 

 

 

 

 

 

31:16

Sequence ID (SEQ_ID)

 

 

 

RO

0000h

 

This field contains the Sequence ID from the 1588 Sync or Delay_Req

 

 

 

packet.

 

 

 

 

 

 

 

 

 

 

 

15:0

Source UUID High (SRC_UUID_HI)

 

 

RO

0000h

 

This field contains the high 16-bits of the Source UUID from the 1588 Sync

 

 

 

or Delay_Req packet.

 

 

 

 

 

 

 

 

 

 

Note: The selection between Sync or Delay_Req packets is based on the corresponding

 

master/slave bit in the 1588 Configuration Register (1588_CONFIG).

 

Note: There are multiple instantiations of this register, one for each port of the LAN9311/LAN9311i. Refer to Section 14.2.5 for additional information.

Note: For Port 0(Host MAC), receive is defined as data from the switch fabric, while transmit is to the switch fabric.

Revision 1.4 (08-19-08)

204

SMSC LAN9311/LAN9311i

 

DATASHEET