Functions 9000-DVS 1 Chapter

Key disable: When the snapshot is recalled, the key settings remain unchanged. This can be set independently for each keyer.

Effect dissolve: The transition from the state before the snapshot recall to the

snapshot settings is carried out smoothly, by a dissolve. The dissolve duration can be set in the Snapshot menu.

Auto transition: An auto transition starts the instant the snapshot is recalled. The auto transition setting is valid only for M/E-1, M/E-2, M/E-3, and PGM/PST.

Note

If both effect dissolve and auto transition are selected as attributes, the auto transition takes precedence.

GPI output: A GPI output is sent to the allocated GPI port the instant the snapshot is recalled.

The trigger type depends on the switcher GPI output settings made in the Setup menu.

For details, see “Interfacing With External Devices (Device Interface Menu)” under “Setup Relating to Switcher Processor” in Chapter 16 (Volume 2).

Table of available attributes

The attributes that can be used depend on the region, as follows.

Yes: Can be used No: Cannot be used

Attribute

 

Region

 

 

 

 

 

 

M/E-1 and PGM/PST

USER 1 to USER 2

DME 1 to DME 4

 

 

 

 

Cross-point hold

Yes

Yes

Yes

 

 

 

 

Key disable a)

Yes

No

No

Effect dissolve

Yes

Yes

Yes

 

 

 

 

Auto transition

Yes

No

No

 

 

 

 

GPI outputs b)

Yes

Yes

No

a)Applicable only as temporary attributes, but not applicable by a menu operation.

b)Applicable only by a menu operation.

For more details, see “Saving and Recalling Snapshots” in Chapter 14 (Volume 2).

120 Snapshots