Keys 4 Chapter
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 0.00 to 359.99 |
|
|
|
|
7 To make the edge soft, press [Soft Edge] to set it on, and adjust the softness.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Soft | Edge softness | 0.00 to 100.00 |
|
|
|
|
•For a normal edge, when [Soft Edge] is enabled, “key drop ON mode” (see page 42) turns on.
•When a luminance key or linear key is selected as the key type, and clean mode is enabled, enabling [Soft Edge] turns the clean mode off.
8 To make separate fine adjustments to the positions of the left, right, top, and bottom of the source edge, press [Fine Key], to set it on, and adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Key top edge position | −2.00 to +2.00 |
|
|
|
|
2 | Left | Key left edge position | −2.00 to +2.00 |
|
|
|
|
3 | Right | Key right edge position | −2.00 to +2.00 |
|
|
|
|
4 | Bottom | Key bottom edge position | −2.00 to +2.00 |
|
|
|
|
6 | H Phase | Key horizontal position | Left edge position |
|
|
| value shown |
|
|
|
|
7 | V Phase | Key vertical position | Top edge position |
|
|
| value shown |
|
|
|
|
Note
In the emboss function it is not possible to set [Fine Key] on.
•When the edge type is normal, drop border or shadow, enabling the [Fine Key] function fixes the key in the “Key drop ON” mode (see page 42).
•When applying a border to the key edge, enabling the [Fine Key] function halves the border width setting range.
Carrying out a color mix for the key edge fill matte
When you select ‘Matte’ for the edge fill of a border, drop border, or shadow, you can create a combination of color 1 and color 2 using a wipe pattern generated by the dedicated pattern generator.
Use the following procedure.
214 Key Setting Operations Using Menus