2 Press the button for the desired pattern.

Setting Independent Key Transition Wipe Modifiers

Available modifiers

You can use the following modifiers with an independent key transition wipe. Note that the available modifiers may depend on the pattern you are using.

•Direction

•Edge

•Positioner

•Rotation

•Aspect ratio

•Pattern replication

Setting the wipe direction (Direction)

In the <Direction> group of the Key1 Wipe Adjust menu, make any of the following selections.

Normal: regular direction

Normal/Reverse: alternate between regular and reverse for each transition

Reverse: reverse direction to normal

Softening the wipe pattern edge (Soft edge)

Use the following procedure.

1 Press [Soft] in the Key1 Wipe Adjust menu, turning it on.

2 Set the following parameter.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Soft

Edge softness

0.00 to 100.00

 

 

 

 

Setting the wipe position (Positioner)

There are two methods of setting the wipe position: using the device control block, or in a menu.

For details of the method using the device control block, see “To set the wipe position using the trackball” (page 247).

To carry out the setting in a menu, use the following procedure.

Wipes 5 Chapter

Wipe Settings for Independent Key Transitions

255