Sony DVS-9000 manual 239

The patterns from the selected pattern group appear on the screen.

For details of wipe patterns, see “Types of Wipe Pattern” (page 46) and the appendix “Wipe Pattern List” (Volume 2).

3 Press the button to select the desired pattern.

4 The parameters change according to the selected pattern, and you can adjust the pattern.

•When a polygon wipe is selected (pattern number 49)

Knob	Parameter	Adjustment	Setting values
1	No.	Number of points	3 to 64
2	Star Rate	Angularity of star	−100.00 to +100.00 a)

a)A value of –100.00 completely removes the star “rays,” leaving a circle; at +100.00 the “rays” are at their sharpest.

•	When a mosaic wipe is selected (pattern numbers 200 to 203, 206 to
	213, 224 to 247, 250 to 257, 260 to 269)
Knob		Parameter	Adjustment	Setting values
1		H Tile No.	Number of tiles horizontally	2 to 36
2		V Tile No.	Number of tiles vertically	2 to 18
•	When a karaoke wipe is selected (pattern numbers 220 to 223)
Knob		Parameter	Adjustment	Setting values
1		Start	Position of start tile	−100.00 to +100.00 a)
2		Row No.	Number of rows of tiles	1 to 36
3		Phase	Delay for next row	−100.00 to +100.00 b)

a)At −100.00 tiles appear from the top (or left edge) of the screen; at +100.00 from the bottom (or right edge) of the screen.

b)At −100.00 all rows appear simultaneously; at +100.00 until one row of tiles is completely displayed, the next row does not start to appear.

•When a random wipe is selected (pattern number 273)

Knob	Parameter	Adjustment	Setting values
1	H Size	Tile width	0.00 to 100.00
2	V Size	Tile height	0.00 to 100.00
3	Volatility	Rate of tile generation	0.00 to 100.00

Wipes 5 Chapter

Basic Procedure for Wipe Settings 239