Panel Control and Menus 2 Chapter

DME4 can be assigned to one keyer. A DME channel assigned to a keyer cannot be selected on another keyer. However, using the override function it is possible to allocate a channel already allocated to another keyer to the currently selected keyer. Using the trace function, it is possible to check which keyer a DME channel is allocated to.

jON AIR indicators

These light red when the corresponding DME channels are included in the final program output.

kOutput destination specification

buttons

MON (monitor): Hold down this button and press the selection button for the DME channel you want to assign to the monitor output; you can then monitor the output signal on the DME monitor output.

While this button is held down, the DME channel selection buttons light as follows, allowing you to check the monitor assignment.

Lit amber: DME channel that can currently be assigned

Lit green: DME channel currently assigned to the monitor output

FM FEED (frame memory feed): PROC KEY (processed key): When this

button is on, the key fill/source signal subjected to key processing or signal subjected to a DME effect on the currently selected keyer can be selected as a reentry signal (PROC V or PROC

K)for the M/E or PGM/PST bank, on the auxiliary bus or the like.

lOVERRIDE button

To select a DME channel already allocated to another keyer or transition to the currently selected keyer (or transition), hold

down this button, and press the DME channel selection button.

mTRACE button

When a DME channel is already allocated to another keyer or transition, hold down this button, and press the corresponding DME channel selection button, to switch to the state in which the keyer (or transition) to which the DME channel is allocated is currently selected.

nAUTO DELEG (auto delegation)

button

When this button is on, the key delegation selection state of the key control block is linked to the key delegation selection state of the independent key transition control block.

146 Names and Functions of Parts of the Control Panel