Functions 9000-DVS 1 Chapter

•Shift Mode: Specify whether the rightmost button of the AUX delegation buttons is used as a shift button, and when it is used as a shift button, the operating mode.

External device connections (Device Interface)

•GPI Input: Set the GPI input ports and trigger type, and make the action settings.

•GPI Output: Set the GPI output ports and trigger type, and make the action settings.

•P-BUS Control: Set the control mode for P-BUS devices.

Operation settings (Operation)

•Button Tally: Set whether or not the system tally generation results are reflected in the panel tally.

•Effect: For keyframe effects, you can make the following settings. (See Chapter 13 “Keyframe Effects” (Volume 2). )

•Recall mode

•Effect Auto Save

•Source/Dest Name: For the Source/Dest (source/destination) names used by the system, select one of the following:

•Source name set by cross-point assignment or fixed bus name

•Description name set on routing switcher

•“Type + No.” name set on routing switcher

•Name Display: Specify the number of characters for display of the names selected in Source/Dest Name above, as two characters, four characters, or Auto.

•Custom Button: Set the following button operating modes.

•[ALL] button for next transition selection

•[AUTO TRANS] or [TAKE] button during auto transition execution

•[UTIL1] and [UTIL2] buttons

•[TRANS PVW] button

•[XPT HOLD] button in the key row

•Main Split Fader: When the split fader is active, specify whether the fader to control other than mix is the left side or the right side.

Screen saver, brightness adjustments, and alarm (Maintenance)

•Screen Saver: Make the menu screen saver settings.

•LCD Brightness: Adjust the LCD brightness.

•LED Brightness: Adjust the LED brightness.

•Switch Brightness: Adjust the switch brightness.

•Touch Beep: Select whether or not to sound a beep when a menu operation is carried out.

128 Setup