Press the [POS] button, turning Position on.

Wipes 5 Chapter

1 In the device control block, press the [M/E1] or [P/P] button, turning it on.

The buttons in the device control block are assigned to the wipe position setting as follows.

 

Table 1: Buttons and assigned settings

 

 

 

Button name

 

Setting

 

 

 

K1 CB1

 

Wipe position for key 1

 

 

 

K2 CB2

 

Wipe position for key 2

 

 

 

K3 FM1

 

Wipe position for key 3

 

 

 

K4 FM2

 

Wipe position for key 4

 

 

 

MAIN

 

Wipe position for common transition (main pattern)

 

 

 

SUB

 

Wipe position for common transition (sub pattern)

 

 

 

 

Table 2: Buttons assigned to functions

 

 

 

Button name

 

Function

 

 

 

POS

 

Toggle Position on or off.

 

 

 

X, Y

 

Fix the operating direction, and enable setting of the wipe

 

 

position from the numeric keypad.

 

 

 

CTR

 

Return the pattern position to the center of the screen.

 

 

 

2 Press one of the buttons in Table 1 above, to select the wipe position to which the operation applies. Multiple selection is possible.

3

4 Move the trackball, to set the wipe position. By pressing the [X] button, turning it on, you can restrict movement to the horizontal direction, and by pressing the [Y] button, turning it on, you can restrict movement to the vertical direction. Also, when either of these buttons is lit, you can enter a coordinate of the wipe position from the numeric keypad.

Rotating the wipe pattern (Rotation)

You can apply rotation independently to the main pattern and sub pattern. Use the following procedure.

1 In the M/E-1> Wipe menu, select HF5 ‘Main Modify.’

The Main Modify menu appears.

2 In the <Rotation> group, select the rotation type.

Angle: Incline the pattern through a fixed angle.

248 Basic Procedure for Wipe Settings