Keys 4 Chapter
For an overview of the edge modifications, see page 40.
The pressed button lights green, and you can now adjust the parameters with the knobs. The display beside each knob shows the first letter of the parameter name and the
Setting the border parameters
When the [BDR] button is lit green, the parameter settings depend on the key type and whether the separate edge function is active. To activate the separate edge function, press [Separate Edge], setting it on, in the Edge menu for the key.
•Separate edge off
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Border width | 0 to 8 a) |
|
|
| (0 to 100) b) |
4 | Density | Border density | 0 to 100 |
|
|
|
|
a)In the “4H mode” and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
b)When a wipe pattern key or key wipe pattern key is selected as the key type
•Separate edge on
The border width settings can be made independently for left, right, top, and bottom sides. The separate edge function is only available when luminance key, linear key, or chroma key is selected as the key type.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Top edge width | 0 to 8 a) |
2 | Left | Left edge width | 0 to 8 a) |
3 | Right | Right edge width | 0 to 8 a) |
4 | Bottom | Bottom edge width | 0 to 8 a) |
a) In the “4H mode” and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [BDR] is selected, the [MORE] button lights amber. Pressing the [MORE] button to turn it green then allows you to adjust the edge fill color parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Saturation | 0 to 100 |
|
|
|
|
3 | Hue | Hue | 0 to 359 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
228 Key Setting Operations With the Key Control Block