Transitions 3 Chapter

Using the transition preview function (page 196), you can check the transition on the preview monitor.

Note

To carry out DME wipes requires the optional BKDS-9470 DME board set.

7 Carry out the transition in the transition execution section.

For a gradual transition such as a mix (dissolve) or wipe: Press the [AUTO TRANS] button, or operate the fader lever.

To execute a transition by pressing the [AUTO TRANS] button, first set the transition rate (specified as the duration of the transition). (See “Setting the Transition Rate” (page 188).)

When you have selected a wipe or DME wipe as the transition type, you can also set the transition range. (See “Pattern Limit” (page 189).)

For an instantaneous transition: Press the [CUT] button.

For details, see “Executing a Transition” (page 187).

178 Basic Operating Procedure