•When turning [Speed] on in the <Rotation> group and rotating the pattern at a constant rate
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Speed | Rotation rate of pattern | −100.00 to +100.00 a) |
a) See page 52.
6 To adjust color 1, set [Color1] on, and to adjust color 2 set [Color2] on, then adjust the parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 0.00 to 359.99 |
|
|
|
|
7 To interchange color 1 and color 2, press the [Color Invert] button, turning it on.
Setting the wipe position (Positioner)
You can set the position independently for the main pattern and sub pattern. Use the following procedure.
1 In the
The Main Modify menu appears.
2 In the <Position> group, press [Position], turning it on, and set the pattern position.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Position H | Horizontal position | −200.00 to +200.00 a) |
2 | Position V | Vertical position | −200.00 to +200.00 a) |
a) See page 51.
To return the pattern position to the center of the screen
In the <Position> group, press [Center].
To move the pattern from its current position to the center through the course of a transition
In the <Position> group, press [Auto Center], turning it on.
To set the wipe position using the trackball
You can also set the wipe position using the trackball in the device control block. Use the following procedure.
Wipes 5 Chapter
Basic Procedure for Wipe Settings | 247 |
|
|