Knob

Parameter

Adjust-

Setting values

 

 

ment

 

 

 

 

 

2

Soft

Edge

0.00 to 100.00

 

 

softness

 

 

 

 

 

3

Density

Key

0.00 to 100.00

 

 

density

 

 

 

 

 

When the [MENU] button in the device control block is lit, you can use the trackball and Z-ring to control the parameters.

•Move the trackball on the x-axis to control the parameter for knob 1 or on the y-axis to control the parameter for knob 2. Moving up or to the right increases the parameter value, and moving down or to the left decreases the parameter value.

•Use the Z-ring to adjust the parameter for knob 3. Turning clockwise increases the parameter value, and turning counterclockwise decreases the parameter value.

Going back to the previous menu

To return to the last displayed menu, press the previous page button.

Panel Control and Menus 2 Chapter

Basic Menu Operations 171