Wipes 5 Chapter

Basic Procedure for Wipe Settings

You carry out wipe setting operations principally using the Wipe menu for each of the M/E-1 and PGM/PST banks.

This section describes the basic procedures for wipe settings, taking the M/E- 1> Wipe menu as an example.

For details of independent key transition wipe settings, see “Wipe Settings for Independent Key Transitions” (page 254).

Wipe Settings Menu

Accessing the wipe settings menu

To access the M/E-1> Wipe menu, use any of the following operations.

•In the menu control block, select the top menu selection button [M/E 1], and press VF5 ‘Wipe.’

•In the transition control block of the M/E-1 bank, press the transition type selection button [WIPE] twice in rapid succession.

Any of the above operations displays the M/E-1>Wipe menu.

Wipe Pattern Selection

You can select a wipe pattern in the Wipe menu.

Selecting a wipe pattern

Use the following procedure.

1 In the M/E-1>Wipe menu, select HF1 ‘Main Pattern.’

The Main Pattern menu appears.

2 Select the wipe pattern group with the pattern group selection button.

Standard: standard wipes

Enhanced: enhanced wipes

Rotary: rotary wipes

Mosaic1 to Mosaic3: mosaic wipes

Random/Dust: random/diamond dust wipes

238 Basic Procedure for Wipe Settings