Transitions 3 Chapter

Setting the Independent Key Transition Type

You can also select the required independent key transition type by a menu operation.

Use the following procedure.

1 In the M/E or PGM/PST menu, select first the desired one from VF1 ‘Key1’ to VF4 ‘Key4,’ then HF6 ‘Transition.’

The Transition menu for the selected appears.

2 Select the required transition type in the <Transition Type> group.

If, in the Setup menus, you set insertion/deletion as independent modes, make the settings for insertion in the <On Transition Type> group, and the settings for deletion in the <Off Transition Type> group.

Setting the Independent Key Transition Rate

You can set the transition rate using the Key menu to access the Transition menu for the M/E or PGM/PST bank.

1 In the M/E or PGM/PST menu, select first the desired one from VF1 ‘Key1’ to VF4 ‘Key4,’ then HF6 ‘Transition.’

The Transition menu for the selected key appears.

2 Select any transition type in the <Transition Type> group.

If, in the Setup menus, you set insertion/deletion as independent modes, make the settings for insertion in the <On Transition Type> group, and the settings for deletion in the <Off Transition Type> group.

3 Turn knob 1 to set the transition rate.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Transition Rate

Transition rate

0 to 999 (frame count)

 

 

 

 

198 Independent Key Transitions