Memory Frame 7 Chapter
1 Press [Store].
The keyboard window appears.
2 In the keyboard window, enter the file name (maximum 8 characters).
3 In the keyboard window press the [Enter] button.
This saves the freeze image as a file in memory.
Selecting the way in which images are combined
To select the way in which the memory image and input signal are combined (see page 63), use the following procedure.
1 In the Edit>Composite menu, press [Composite Adjust].
The Composite Adjust menu appears.
Note that to preview the composite image on the monitor screen, in this menu <Output> group, select [Memory Input].
2 In the <Type> group, select one of the following methods of combination.
•Pattern Key: pattern key
•Ext Key: external key
(Can only be selected when “V/K MODE” is on.)
•Mix: mix
Note
In the Input Mask menu, if “Sub Mask” is on, when you select a pattern key, external key, or mix, “Sub Mask” goes off. Again, if any of these is selected when you turn “Input Mask” on, any combination method selected in the <Type> group is deselected.
•NAM:
If none of the above is selected, image combination is not carried out.
3 Depending on the selection in step 2, make the required settings.
• When pattern key is selected
Press [Pattern Select] to display the Composite Adjust>Pattern Select menu, and carry out pattern selection.
Press any pattern from those displayed (standard wipe patterns 1 to 24) to select it, then adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Size of pattern | 0.00 to 100.00 |
|
|
|
|
274 Frame Memory Operations