A freeze is now possible.
6 If necessary, make the video process settings (see page 269) or mask settings (see page 270) for application to the selected signal.
7 In the <Freeze> group, press one of the following, to write a freeze image to temporary memory.
Frame: Freeze a video frame.
Field: Freeze a video field.
Off: End the freeze, and delete the recorded freeze image.
To return to the state immediately before executing a freeze, press [Undo] in the <Freeze> group.
Notes
• Be sure to save the freeze image written to temporary memory. It is deleted if you start operating on another FM without saving it.
• When the system is powered off, any freeze images written to temporary memory are lost.
• If you use “Input Mask,” a field freeze is not available.
Saving a freeze image in frame memory
To save a captured image in frame memory, use the following procedure in the Edit>Freeze menu.
Frame Memory Operations
Press [Freeze Enable], turning it on.
5
To enable V/K mode, press [V/K Mode] turning it on.
Note
This is only possible when [Pair] is selected in the <Select> group.
4
Select HF2 ‘Freeze.’
The Edit>Freeze menu appears. In this menu, you can enable the pair setting (see page 267).
3
Select the target frame memory. For the procedure, see page 267.
2
In the Frame Memory menu, select VF2 ‘Edit’ and HF1 ‘Select.’ The Edit>Select menu appears.
1

Memory Frame 7 Chapter

268