Setting the drop border or shadow parameters
When the [DROP BDR] or [SHDW] button is lit green, the parameter settings differ between the “key drop OFF” and “key drop ON” modes (see page 42) as shown below. Switching between these two modes is made by turning the [KEY DROP] button on or off.
•“Key drop OFF” mode
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 | Width | Width | 0 to | 8 |
|
|
|
| |
2 | Position | Position | 180 to 359 | |
|
|
|
|
|
4 | Density | Density | 0 to | 100 |
|
|
|
|
|
• “Key drop ON” mode
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Width | 0 to 8 a) |
2 | Position | Position | 0 to 359 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
a) In the “4H mode” and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [DROP BDR] or [SHDW] is selected, the [MORE] button lights amber. Pressing the [MORE] button to turn it green then allows you to adjust the edge fill color parameters with the knobs.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Saturation | 0 to 100 |
|
|
|
|
3 | Hue | Hue | 0 to 359 |
|
|
|
|
4 | Density | Density | 0 to 100 |
|
|
|
|
Setting the outline parameters
When the [OUTLINE] button is lit green, the parameter settings depend on the key type and whether the separate edge function is active. To activate the separate edge function, press [Separate Edge], setting it on, in the Edge menu for the key.
•Separate edge off
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Outline width | 0 to 8 a) |
|
|
| (0 to 100) b) |
Keys 4 Chapter
Key Setting Operations With the Key Control Block | 229 |
|
|