Functions 9000-DVS 1 Chapter

Signal Assignment and Selection

Assigning signals to buttons

Each cross-point button has a corresponding button number, to which you assign a signal.

In addition to the signals input to the PRIMARY INPUTS connectors on the rear panel of the switcher, you can also select signals generated within the switcher.

Each button has assigned to it a video signal and a key signal, forming a pair. You can set these video and key combinations in a Setup menu.

For details of Setup menu operations, see Chapter 16 “Engineering Setup” (Volume 2).

Cross-point button control block button numbers

On the M/E and PGM/PST banks, each cross-point button and reentry button has two button numbers, and you use the shift button to switch between these numbers.

The button numbers are as follows.

20 Signal Selection