When emboss is selected:
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Width | 0.00 to 8.00 |
|
|
|
|
2 | Position | Position | 0.00 to 359.99 |
|
|
|
|
3 | Density a) | Density | 0.00 to 100.00 |
a)The Density adjustment only affects the key edge. This can be adjusted separately from Key Density, and if Key Density is set to 0.00, the embossed edge effect only can be applied.
To make edge fill adjustments, carry out the settings in step 6.
4 Select the edge fill signal in the <Edge Fill> group.
Utility 1 Bus: signal selected on the utility 1 bus
Matte: signal from dedicated color matte generator.
It becomes possible to adjust color 1.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 0.00 to 359.99 |
|
|
|
|
When the edge type is outline, in place of the edge fill signal, the selected key fill signal fills the outline, and elsewhere remains as the background.
5 Carry out the following operation, depending on the selection in step 4.
When [Utility 1 Bus] is selected: Press the key delegation button [UTIL1], turning it on, and select the signal in the key row.
When [Matte] is selected: Press [Matte Adjust] in the same EDGE menu, to display the Matte Adjust menu, and adjust a single color or two- color combination color matte.
You can select whether to use a single color matte or a
For the color mix operation, see “Carrying out a color mix for the key edge fill matte” (page 214).
6 When emboss is selected for the edge type, adjust the color in the <Emboss Fill> group.
To adjust matte 1 press [Matte1], and to adjust matte 2 press [Matte2], then adjust the following parameters.
Keys 4 Chapter
Key Setting Operations Using Menus 213