2 To preview the combined memory image and input image (the image to be written to temporary memory) on the monitor screen, in the <Output> group press [Memory Input] to select it.

3 To select the input signal, in the <Input> group select the signal.

FMS: Frame memory source bus signal. (For details of the method of selection see page 266.)

Color: Color matte signal. When this is selected, use the knobs to adjust the following parameters.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Luminance

Luminance

0.00 to 100.00

 

 

 

 

2

Saturation

Saturation

0.00 to 100.00

 

 

 

 

3

Hue

Hue

0.00 to 359.99

 

 

 

 

4 As required, set the video processing (see page 269) or masking (see page

270)to be applied to the input signal.

Note

The video processing setting is only valid for frame memory source bus signal.

5 To select the way in which the memory image and input signal are combined, press [Composite Adjust].

For details of the setting, see “Selecting the way in which images are combined” (page 274).

6 In the state in which you want to freeze, in the <Freeze> group press [Frame].

This writes the combined freeze image to temporary memory.

To return to the previous state immediately after the freeze, press [Undo] in the <Freeze> group.

To check the video with the freeze released on a monitor

In the <Output> group, press [Memory Input].

Saving a processed image

To save a processed image as a file, in the Edit>Composite menu use the following procedure.

Memory Frame 7 Chapter

Frame Memory Operations 273