When [Mix Color] is on, and the [MORE] button is lit amber
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Color 1 luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Color 1 saturation | 0 to 100 |
|
|
|
|
3 | Hue | Color 1 hue | 0 to 359 |
|
|
|
|
4 | Size | Pattern size | 0 to 100 |
|
|
|
|
| When [Mix Color] is on, and the [MORE] button is lit green | ||
|
|
|
|
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Color 2 luminance | 0 to 100 |
|
|
|
|
2 | Saturation | Color 2 saturation | 0 to 100 |
|
|
|
|
3 | Hue | Color 2 hue | 0 to 359 |
|
|
|
|
4 | Soft | Edge softness | 0 to 100 |
|
|
|
|
When using the key fill bus signal: Press the [MATTE FILL] button, turning it off. To select the key fill signal, use the key row in the
Selecting key source
•To use the key source paired with the key fill signal selected on the key fill bus, press the [AUTO SEL] button, turning it on. The pairing of the cross- point buttons for key fill and key source is carried out in the Setup menu. (See
•To select key source independently of the key fill signal selected on the key fill bus and paired with key source, hold down the key delegation button [KEY1], then press the desired button in the
•To use as key source the same signal as the key fill signal selected on the key fill bus, select the SELF mode by pressing the [AUTO SEL] button and [SPLIT] button simultaneously so that both are off. When chroma key is selected as the key type, select the SELF mode.
Key Edge Modifications
To apply a modification to the key edge, press one of the edge type selection buttons in the key control block.
[BDR] button: border
[DROP BDR] button: drop border
[SHDW] button: shadow
[OUTLINE] button: outline
[EMBOS] button: emboss
Keys 4 Chapter
Key Setting Operations With the Key Control Block | 227 |
|
|