Wipes 5 Chapter
1 In the
2 In the <Edge> group, select the edge type.
Border: border
Soft: soft edge
Soft Border: soft border
For an overview, see “Edge” (page 50).
3 Set the parameters according to the selection in step 2.
• When border is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Width | Border width | 0.00 to 100.00 |
|
|
|
|
• | When soft edge is selected |
| ||
|
|
|
| |
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 |
| Soft | Edge softness | 0.00 to 100.00 |
|
|
|
|
|
• | When soft border is selected |
| ||
|
|
|
| |
Knob | Parameter | Adjustment | Setting values | |
|
|
|
|
|
1 |
| Width | Border width | 0.00 to 100.00 |
|
|
|
|
|
2 |
| Inner Soft | Border inner softness | 0.00 to 100.00 |
|
|
|
|
|
3 |
| Outer Soft | Border outer softness | 0.00 to 100.00 |
|
|
|
|
|
4 When you selected border or soft border, select the edge fill signal in the <Edge Fill> group.
Utility 2 Bus: signal selected on the utility 2 bus
Matte: signal from the dedicated color matte generator
5 Depending on the operation in step 4, carry out the following operation.
When ‘Utility 2 Bus’ is selected: Press Hold Press down Press the key delegation button [UTIL2], turning it on, and select the signal in the key row.
When ‘Matte’ is selected: In the same Edge/Direction menu, press [Matte Adjust] to display the Matte Adjust menu, then adjust the
244 Basic Procedure for Wipe Settings