Panel Control and Menus 2 Chapter
When the Key Frame menu is currently shown: The menu screen switches to the menu that was on the screen immediately before the Key Frame menu.
Menu Operations
Selecting an item
Use the following procedure.
1 Press the VF button (1 to 7) for the desired group of items.
The HF button (1 to 7) indications change to show the items within the selected group.
2 Press the HF button for the desired item.
The indications in the status area and function button area change, and you can now make various changes to the selected item.
Selecting a function
Press the appropriate function button within the function button area.
Shape and color of the button Pressing the button turns it on, and it lights, showing the state.
Lit pale blue: The function is enabled, and the parameters can currently be adjusted with the knobs.
Lit orange: The function is enabled.
Lit purple: Execution button. Pressing the button immediately executes
the function. (Example: [Auto Start] button in the Chroma Adjust menu)
Pressing a button of this type displays a further menu, allowing more detailed settings. (Example: [Chroma Adjust] button in the Type menu)
Setting parameters
This marking on a function button indicates that there are parameters which can be adjusted with the knobs.
Pressing this function button assigns parameters to the knobs.
You can set the parameter values by any of the following methods.
•Turn the knob (1 to 5) corresponding to the parameter, to adjust the value.
•Press the knob parameter buttons (1 to 5) corresponding to the parameter. This displays the numeric keypad window allowing you to enter the desired value.
In the description of specific setting procedures, the knob adjustment is described, as follows.
Example: When wipe pattern key is selected
Knob | Parameter | Adjust- | Setting values |
|
| ment |
|
|
|
|
|
1 | Size | Pattern | 0.00 to 100.00 |
|
| size |
|
|
|
|
|
170 Basic Menu Operations